import os, sys
import datetime
import time
from schainpy.controller import Project
path = '/home/alex/Downloads/NEW_WR2/spc16removeDC'
figpath = path
desc = "Simulator Test"

controllerObj = Project()

controllerObj.setup(id='10', name='Test Simulator', description=desc)

readUnitConfObj = controllerObj.addReadUnit(datatype='SimulatorReader',
                                            frequency=9.345e9,
                                            FixRCP_IPP=60,
                                            Tau_0=30,
                                            AcqH0_0=0,
                                            samples=330,
                                            AcqDH_0=0.15,
                                            FixRCP_TXA=0.15,
                                            FixRCP_TXB=0.15,
                                            Fdoppler=600.0,
                                            Hdoppler=36,
                                            Adoppler=300,  # 300
                                            delay=0,
                                            online=0,
                                            walk=0,
                                            profilesPerBlock=625,
                                            dataBlocksPerFile=100)  # ,#nTotalReadFiles=2)
'''
readUnitConfObj = controllerObj.addReadUnit(datatype='VoltageReader',
                                            path=path,
                                            startDate="2020/01/01",   #"2020/01/01",#today,
                                            endDate= "2020/12/01",  #"2020/12/30",#today,
                                            startTime='00:00:00',
                                            endTime='23:59:59',
                                            delay=0,
                                            #set=0,
                                            online=0,
                                            walk=1)
'''
opObj11 = readUnitConfObj.addOperation(name='printInfo')

procUnitConfObjA = controllerObj.addProcUnit(datatype='VoltageProc', inputId=readUnitConfObj.getId())
# opObj11 = procUnitConfObjA.addOperation(name='CohInt', optype='other')
# opObj11.addParameter(name='n', value='10', format='int')

# opObj10 = procUnitConfObjA.addOperation(name='selectChannels')
# opObj10.addParameter(name='channelList', value=[0])
opObj11 = procUnitConfObjA.addOperation(name='PulsePairVoltage', optype='other')
opObj11.addParameter(name='n', value='625', format='int')  # 10
opObj11.addParameter(name='removeDC', value=1, format='int')

# opObj11 = procUnitConfObjA.addOperation(name='PulsepairPowerPlot', optype='other')
# opObj11 = procUnitConfObjA.addOperation(name='PulsepairSignalPlot', optype='other')


# opObj11 = procUnitConfObjA.addOperation(name='PulsepairVelocityPlot', optype='other')
# opObj11.addParameter(name='xmax', value=8)

# opObj11 = procUnitConfObjA.addOperation(name='PulsepairSpecwidthPlot', optype='other')

procUnitConfObjB = controllerObj.addProcUnit(datatype='ParametersProc', inputId=procUnitConfObjA.getId())


opObj10 = procUnitConfObjB.addOperation(name='ParameterWriter')
opObj10.addParameter(name='path', value=figpath)
# opObj10.addParameter(name='mode',value=0)
opObj10.addParameter(name='blocksPerFile', value='100', format='int')
opObj10.addParameter(name='metadataList', value='utctimeInit,timeInterval', format='list')
opObj10.addParameter(name='dataList', value='dataPP_POW,dataPP_DOP,dataPP_SNR,dataPP_WIDTH')  # ,format='list'

controllerObj.start()