import os, sys
import datetime
import time
from schainpy.controller import Project
path = '/home/alex/Downloads/NEW_WR2'
figpath = path
desc = "Simulator Test"

controllerObj = Project()

controllerObj.setup(id='10', name='Test Simulator', description=desc)

readUnitConfObj = controllerObj.addReadUnit(datatype='SimulatorReader',
                                            frequency=9.345e9,
                                            FixRCP_IPP=60,
                                            Tau_0=30,
                                            AcqH0_0=0,
                                            samples=330,
                                            AcqDH_0=0.15,
                                            FixRCP_TXA=0.15,
                                            FixRCP_TXB=0.15,
                                            Fdoppler=200.0,
                                            Hdoppler=36,
                                            Adoppler=300,
                                            delay=0,
                                            online=0,
                                            walk=0)

# opObj11         = readUnitConfObj.addOperation(name='printInfo')

procUnitConfObjA = controllerObj.addProcUnit(datatype='VoltageProc', inputId=readUnitConfObj.getId())

# opObj10 = procUnitConfObjA.addOperation(name='selectChannels')
# opObj10.addParameter(name='channelList', value=[0,1])
# opObj10.addParameter(name='channelList', value='0',format='intlist')

opObj11 = procUnitConfObjA.addOperation(name='PulsePairVoltage', optype='other')
opObj11.addParameter(name='n', value='32', format='int')
opObj11.addParameter(name='removeDC', value=1, format='int')
'''
type="power"
opObj10 = procUnitConfObjA.addOperation(name='ScopePlot', optype='external')
#opObj10.addParameter(name='id', value='12')
opObj10.addParameter(name='wintitle', value=type )
opObj10.addParameter(name='type', value=type)
'''

type = "WeatherPower"
opObj10 = procUnitConfObjA.addOperation(name='PulsepairPowerPlot', optype='external')
# opObj10.addParameter(name='id', value='12')
opObj10.addParameter(name='wintitle', value=type)

'''
type="WeatherVeloity"

opObj10 = procUnitConfObjA.addOperation(name='PulsepairVelocityPlot', optype='external')
#opObj10.addParameter(name='id', value='12')
opObj10.addParameter(name='wintitle', value=type )
'''

controllerObj.start()